Rajaindotools

Volkel Hand tap set left M 3 x 0.5

Rp206.850,00
Volkel

Application: for general use non abrasive material up to 900 N/mm² unalloyed and low alloyed steel for through and blind holes for thread cutting by hand Contents: 1x Hand tap Rougher, left, DIN 352, HSS-G, M 3 x 0.5 VÖLKEL 27026-1 1x Hand tap Intermediate, left, DIN 352, HSS-G, M 3 x 0.5 VÖLKEL 27026-2 1x Hand tap Finisher, left, DIN 352, HSS-G, M 3 x 0.5 VÖLKEL 27026-3 Additional Attributes Type of thread metric ISO-thread DIN 13 Standard DIN 352 Material HSS-G Tolerance ISO 2 /6H Size Nominal diameter D M 3 x 0.5 Overall length (L1) 40 mm…

Stok habis

SKU: 27026
Category: , ,
Tags: , , , , , , , , , , , , , , , ,

Deskripsi

Application :

  • for general use
  • non abrasive material up to 900 N/mm²
  • unalloyed and low alloyed steel
  • for through and blind holes
  • for thread cutting by hand

Contents :

  • 1x Hand tap Rougher, left, DIN 352, HSS-G, M 3 x 0.5 VÖLKEL 27026-1
  • 1x Hand tap Intermediate, left, DIN 352, HSS-G, M 3 x 0.5 VÖLKEL 27026-2
  • 1x Hand tap Finisher, left, DIN 352, HSS-G, M 3 x 0.5 VÖLKEL 27026-3

Additional Attributes :

  • Type of thread metric ISO-thread DIN 13
  • Standard DIN 352
  • Material HSS-G
  • Tolerance ISO 2 /6H
  • Size Nominal diameter D M 3 x 0.5
  • Overall length (L1) 40 mm
  • Thread length (L2) 11 mm
  • Shank diameter (D2) 3.5 mm
  • Drive connector Square 2.7 mm

Informasi Tambahan

Berat 1 kg
Material

HSS-G
Size

M 3 x 0.5
Satuan

– 3 pcs
Standard

DIN 352

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Volkel Hand tap set left M 3 x 0.5”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Produk Terkait