Rajaindotools

Volkel Hand Tap M8 x 1.25 27642

Rp176.550,00
Volkel

Application: for general use non abrasive material up to 900 N/mm² unalloyed and low alloyed steel for through and blind holes for thread cutting by hand Contents: 1x Hand tap Rougher, non-serial, ForA, DIN 352, HSS-G, M 8 x 1.25 VÖLKEL 27642-1 1x Hand tap Intermediate, non-serial, DIN 352, HSS-G, M 8 x 1.25 VÖLKEL 27642-2 1x Hand tap Finisher, non-serial, DIN 352, HSS-G, M 8 x 1.25 VÖLKEL 27642-3 Additional Attributes Type of thread metric ISO-thread DIN 13 Standard DIN 352 Material HSS-G Tolerance ISO 2 /6H Size Nominal diameter D M 8 x 1.25 Overall length (L1) 56…

Stok 1

SKU: 27642
Category: , , ,
Tags: , , , , , , , , , , , , , , , ,

Deskripsi

Application:

  • for general use
  • non abrasive material up to 900 N/mm²
  • unalloyed and low alloyed steel
  • for through and blind holes
  • for thread cutting by hand

Contents:

  • 1x Hand tap Rougher, non-serial, ForA, DIN 352, HSS-G, M 8 x 1.25 VÖLKEL 27642-1
  • 1x Hand tap Intermediate, non-serial, DIN 352, HSS-G, M 8 x 1.25 VÖLKEL 27642-2
  • 1x Hand tap Finisher, non-serial, DIN 352, HSS-G, M 8 x 1.25 VÖLKEL 27642-3

Additional Attributes

  • Type of thread metric ISO-thread DIN 13
  • Standard DIN 352
  • Material HSS-G
  • Tolerance ISO 2 /6H
  • Size Nominal diameter D M 8 x 1.25
  • Overall length (L1) 56 mm
  • Thread length (L2) 22 mm
  • Shank diameter (D2) 6 mm
  • Drive connector Square 4.9 mm

Informasi Tambahan

Berat 1 kg
Material

HSS-G
Size

M 8 x 1.25
Satuan

– 3 pcs
Standard

DIN 352

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Volkel Hand Tap M8 x 1.25 27642”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Produk Terkait