Keranjang Anda kosong!
Volkel Hand Tap M 5 x 0.8
Rp132.600,00
Application: for general use non abrasive material up to 900 N/mm² unalloyed and low alloyed steel for through and blind holes for thread cutting by hand Contents: 1x Hand tap Rougher, non-serial, ForA, DIN 352, HSS-G, M 5 x 0.8 VÖLKEL 27634-1 1x Hand tap Intermediate, non-serial, DIN 352, HSS-G, M 5 x 0.8 VÖLKEL 27634-2 1x Hand tap Finisher, non-serial, DIN 352, HSS-G, M 5 x 0.8 VÖLKEL 27634-3 Additional Attributes Type of thread metric ISO-thread DIN 13 Standard DIN 352 Material HSS-G Tolerance ISO 2 /6H Size Nominal diameter D M 5 x 0.8 Overall length (L1) 50…
Stok habis
Deskripsi
Application:
- for general use
- non abrasive material up to 900 N/mm²
- unalloyed and low alloyed steel
- for through and blind holes
- for thread cutting by hand
Contents:
- 1x Hand tap Rougher, non-serial, ForA, DIN 352, HSS-G, M 5 x 0.8 VÖLKEL 27634-1
- 1x Hand tap Intermediate, non-serial, DIN 352, HSS-G, M 5 x 0.8 VÖLKEL 27634-2
- 1x Hand tap Finisher, non-serial, DIN 352, HSS-G, M 5 x 0.8 VÖLKEL 27634-3
Additional Attributes
- Type of thread metric ISO-thread DIN 13
- Standard DIN 352
- Material HSS-G
- Tolerance ISO 2 /6H
- Size Nominal diameter D M 5 x 0.8
- Overall length (L1) 50 mm
- Thread length (L2) 16 mm
- Shank diameter (D2) 6 mm
- Drive connector Square 4.9 mm
Informasi Tambahan
| Berat | 1 kg |
|---|---|
| Material | HSS-G |
| Size | M 5 x 0.8 |
| Satuan | – 3 pcs |
| Standard | DIN 352 |
Produk Terkait
-
Nippon Mata Bor Besi Baja 3.5mm W4 Tin Coated
Rp5.250,00 -
Nippon Mata Bor Besi Baja 7mm M2
Rp21.300,00 -
Nippon Mata Bor Besi Baja 10mm M2
Rp45.900,00 -
Nippon Mata Bor Besi Baja 12mm M2
Rp66.750,00 -
Nippon Mata Bor Beton SDS Plus 14 x 46mm
Rp45.300,00
Ulasan
Belum ada ulasan.