Keranjang Anda kosong!
Volkel Hand Tap M 4 x 0.75
Rp233.400,00
Application: for general use non abrasive material up to 900 N/mm² unalloyed and low alloyed steel for through and blind holes for thread cutting by hand Contents: 1x Hand tap Rougher, non-serial, ForA, DIN 352, HSS-G, M 4 x 0.75 VÖLKEL 27631-1 1x Hand tap Intermediate, non-serial, DIN 352, HSS-G, M 4 x 0.75 VÖLKEL 27631-2 1x Hand tap Finisher, non-serial, DIN 352, HSS-G, M 4 x 0.75 VÖLKEL 27631-3 Additional Attributes Type of thread metric ISO-thread DIN 13 Standard DIN 352 Material HSS-G Tolerance ISO 2 /6H Size Nominal diameter D M 4 x 0.75 Overall length (L1) 45…
Stok habis
Deskripsi
Desc. Volkel Hand Tap M 4 x 0.75
Application:
- for general use
- non abrasive material up to 900 N/mm²
- unalloyed and low alloyed steel
- for through and blind holes
- for thread cutting by hand
Contents:
- 1x Hand tap Rougher, non-serial, ForA, DIN 352, HSS-G, M 4 x 0.75 VÖLKEL 27631-1
- 1x Hand tap Intermediate, non-serial, DIN 352, HSS-G, M 4 x 0.75 VÖLKEL 27631-2
- 1x Hand tap Finisher, non-serial, DIN 352, HSS-G, M 4 x 0.75 VÖLKEL 27631-3
Additional Attributes Volkel Hand Tap M 4 x 0.75
- Type of thread metric ISO-thread DIN 13
- Standard DIN 352
- Material HSS-G
- Tolerance ISO 2 /6H
- Size Nominal diameter D M 4 x 0.75
- Overall length (L1) 45 mm
- Thread length (L2) 13 mm
- Shank diameter (D2) 4.5 mm
- Drive connector Square 3.4 mm
Informasi Tambahan
| Berat | 1 kg |
|---|---|
| Material | HSS-G |
| Size | M 4 x 0.75 |
| Satuan | – 3 pcs |
| Standard | DIN 352 |
1 ulasan untuk Volkel Hand Tap M 4 x 0.75
Produk Terkait
-
Nippon Mata Bor Besi Baja 9.5mm M2
Rp39.150,00 -
Nippon Mata Bor Besi Baja 3.3mm W4 Tin Coated
Rp5.250,00 -
Nippon Mata Bor Beton SDS Plus 8 x 16mm
Rp14.100,00 -
Nippon Mata Bor Besi Baja 2.5mm M2
Rp3.000,00 -
Nippon Mata Bor Besi Baja 4mm M2
Rp7.950,00
Shohieb –
Mendarat dengan selamat.. thnks bosku