Keranjang Anda kosong!
Volkel Hand Tap M 24 x 3.0
Rp954.750,00
Application: for general use non abrasive material up to 900 N/mm² unalloyed and low alloyed steel for through and blind holes for thread cutting by hand Contents: 1x Hand tap Rougher, non-serial, ForA, DIN 352, HSS-G, M 24 x 3.0 VÖLKEL 27674-1 1x Hand tap Intermediate, non-serial, DIN 352, HSS-G, M 24 x 3.0 VÖLKEL 27674-2 1x Hand tap Finisher, non-serial, DIN 352, HSS-G, M 24 x 3.0 VÖLKEL 27674-3 Additional Attributes Type of thread metric ISO-thread DIN 13 Standard DIN 352 Material HSS-G Tolerance ISO 2 /6H Size Nominal diameter D M 24 x 3.0 Overall length (L1) 110…
Stok habis
Deskripsi
Application:
- for general use
- non abrasive material up to 900 N/mm²
- unalloyed and low alloyed steel
- for through and blind holes
- for thread cutting by hand
Contents:
- 1x Hand tap Rougher, non-serial, ForA, DIN 352, HSS-G, M 24 x 3.0 VÖLKEL 27674-1
- 1x Hand tap Intermediate, non-serial, DIN 352, HSS-G, M 24 x 3.0 VÖLKEL 27674-2
- 1x Hand tap Finisher, non-serial, DIN 352, HSS-G, M 24 x 3.0 VÖLKEL 27674-3
Additional Attributes
- Type of thread metric ISO-thread DIN 13
- Standard DIN 352
- Material HSS-G
- Tolerance ISO 2 /6H
- Size Nominal diameter D M 24 x 3.0
- Overall length (L1) 110 mm
- Thread length (L2) 50 mm
- Shank diameter (D2) 18 mm
- Drive connector Square 14.5 mm
Informasi Tambahan
| Berat | 1 kg |
|---|---|
| Material | HSS-G |
| Size | M 24 x 3.0 |
| Satuan | – 3 pcs |
| Standard | DIN 352 |
Produk Terkait
-
Nippon Mata Bor Besi Baja 5mm M2
Rp11.850,00 -
Nippon Mata Bor Besi Baja 5.5mm M2
Rp12.600,00 -
Nippon Mata Bor Besi Baja 7mm M2
Rp21.300,00 -
Nippon Mata Bor Besi Baja 2mm M2
Rp2.700,00 -
Nippon Mata Bor Besi Baja 2.5mm M2
Rp3.000,00
Ulasan
Belum ada ulasan.