Rajaindotools

Volkel Hand Tap M 2.6 x 0.45

Rp233.400,00
Volkel

Application: for general use non abrasive material up to 900 N/mm² unalloyed and low alloyed steel for through and blind holes for thread cutting by hand Contents: 1x Hand tap taper DIN 352 HSS-G – M 2.6 x 0.45 VÖLKEL 27324-1 1x Hand tap second DIN 352 HSS-G – M 2.6 x 0.45 VÖLKEL 27324-2 1x Hand tap finisher DIN 352 HSS-G – M 2.6 x 0.45 VÖLKEL 27324-3 Additional Attributes Type of thread metric ISO-thread DIN 13 Standard DIN 352 Material HSS-G Tolerance ISO 2 /6H Size Nominal diameter D 2.6 x 0.45 Overall length (L1) 40 mm Thread…

Stok habis

SKU: 27324
Category: , , ,
Tags: , , , , , , , , , , , , , , , ,

Deskripsi

Application:

  • for general use
  • non abrasive material up to 900 N/mm²
  • unalloyed and low alloyed steel
  • for through and blind holes
  • for thread cutting by hand

Contents:

  • 1x Hand tap taper DIN 352 HSS-G – M 2.6 x 0.45 VÖLKEL 27324-1
  • 1x Hand tap second DIN 352 HSS-G – M 2.6 x 0.45 VÖLKEL 27324-2
  • 1x Hand tap finisher DIN 352 HSS-G – M 2.6 x 0.45 VÖLKEL 27324-3

Additional Attributes

  • Type of thread metric ISO-thread DIN 13
  • Standard DIN 352
  • Material HSS-G
  • Tolerance ISO 2 /6H
  • Size Nominal diameter D 2.6 x 0.45
  • Overall length (L1) 40 mm
  • Thread length (L2) 9 mm
  • Shank diameter (D2) 2.8 mm
  • Drive connector Square 2.1 mm

Informasi Tambahan

Berat 1 kg
Material

HSS-G
Size

M 2.6 x 0.45
Satuan

– 3 pcs
Standard

DIN 352

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Volkel Hand Tap M 2.6 x 0.45”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Produk Terkait